Nano-Beam X-Ray Nanodiffraction (2D n-XRD)
The sample size (L x W) will determine if sample can share the holder plate to saving exchange and positioning time. The total thickness of sample must lest than 5 mm.
Sample Transfer & Pumping Down*
Sample components and outgassing rate will determine the pumping time.
The average grain size of your crystal or sample.
Region of Interest (ROI)*
Select a dedicated area to measure. If "Yes", please provide information of ROI when send the sample. We will use on-line SEM in x-ray chamber to positioning.
Measurement Range (X-axis)*
The measurement range in the horizontal direction in micrometers (μm).
Measurement Range (Y-axis)*
The measurement range in the vertical direction in micrometers (μm).
Measurement Step Size*
Select the scan step size between each point.
Select the data analysis method for your sample.
Raw Data: 32bits tif files.
Basic Data Analysis: Conver Laue pattens to 2D Images (Inculding crystallinity & grain distribution).
Advance Data Analysis: Crystal phases, orientations, dislocation density, strain and stress.
Delivery Time of Data*
Data Available Time (From the Date of SGService Received the Sample, Noted on System Notification Letter)
We will return your sample via FedEx/DHL/UPS/EMS when "Yes". Just select once for one sample, we will return entire samples in the same order number to your member registered address.
Please Noted Your Special Requirements Here (Ex. Sample Handling Condition, Different Return Address of Sample)