Industrial production line application level non-destructive nano-tomography platform

The world's best industrial nano-level X-ray light source with a maximum power of 11W

Excillum NanoTube N3 X-ray Source

The Excillum NanoTube N3 provides geometric-magnification X-ray imaging systems with industry-leading stability and resolution without the need for manual adjusting.

Advanced tungsten-diamond transmission target technology and sophisticated electron optics form the foundation of the Excillum NanoTube N3. Every time, the smallest, roundest spot is produced owing to the automatic e-beam focusing and astigmatism correction.

Moreover, the NanoTube N3 has the distinctive capability of monitoring and reporting the current spot size inside. Furthermore, cutting-edge cooling and thermal design produce extraordinary stability over lengthy exposures. This permits a real resolution of 150 nm lines and spaces.

Industry-leading hybrid pixel cadmium telluride (CdTe) single-photon counting high-speed X-ray detector

Dectris EIGER2 R CdTe 500K Detector

Number of modules (WxH)	1 x 1 = 1
Sensor	Cadmium Telluride (CdTe)
Sensor material	Silicon (Si)
Sensor thickness	750 µm
Pixel size (W x H)	75 µm x 75 µm
Pixel array format (W x H)	1028 pixels x 512 pixels = 526 336 pixels
Active area (W x H)	77.1mm x 38.4mm = 2977.99mm ²
Intra-module gap	2 pixels wide vertical gap in the center of each module
Defective pixels	< 0.1%
Image bit depth	32 bit or 16 bit
Readout bit depth	16 bits
Maximum count rate	9.8 × 10 ⁸ photons/s/mm ²
Adjustable threshold range	4keV to 30keV
Energy range	8keV to 25keV
Number of thresholds	two independent thresholds
Readout time	continuous readout with 100 ns dead time
Maximum frame rate	100 Hz
Point-spread function	1 pixel (FWHM)
Connection to detector control unit	1 x LC/UPC duplex fiber optic connectors
Power supply	External power supply unit
Software interface	HTTP REST interface
Dimensions (W x H x D)	114mm x 92mm x 241.5mm
Weight	3.7kg
Maximum operating altitude	2000m asl

The industry's smallest radial and axial error air bearing, with a minimum of 20 nanometers

Lab Motion Systems RT150ST

Bearing type	air bearing
Max. speed	725 RPM
Max.axial load	226N
Radial error motion	< 100nm
Axial error motion	< 50nm
Angular accuracy	± 6.9 arcsec
Nominal torque	1.5Nm
Peak torque	2.5Nm
Total mass	6.2kg

Lab Motion Systems XY150B-12

Bearing type	ball bearing
Stroke	±6mm
Load capacity	10kg
Min. Incr. motion	0.1 µm
Repeatability	±0.2 µm
Speed	0.22mm/s
Total mass	2.1kg
Material	coated aluminum
Optimal compatibility	RT150 RT250

X-ray 2D Radiography (Transmission Image)-FPD