MetalJet E1+ 160 kV
Description
At 1000 watts, the new Excillum MetalJet E1+ delivers 17 times more X-ray flux across a broad spectral range compared to a 30 W conventional tungsten-solid-anode microfocus source with the same 30 µm
Specification
SG 匯率表
- 幣別
- 金額換算
- 新台幣 (TWD)
- 0
- 美金 (USD)
- 0
- 歐元 (EUR)
- 0
- 瑞士法郎 (CHF)
- 0
- 日圓 (JPY)
- 0
- 人民幣 (CNY)
- 0
- 英鎊(GBP)
- 0
- 澳幣(AUD)
- 0
- 新加坡幣(SGD)
- 0
- 加拿大幣(CAD)
- 0
- 紐元(NZD)
- 0
| Technical specifications | |||
| Target material1 | Liquid metal alloy | Min. focal spot size | < 10 μm |
| Target type | Liquid jet | Emission stability3 | < 1% |
| Voltage | 30-160 kV | Position stability3 | < 1 μm |
| Power2 | 0-1000 W | Min. focus-object distance | 22.5mm |
| Max current | 6.25 mA | Beam angle | 20° |
1) The room temperature liquid metal alloys supplied for the MetalJet source consist mainly of gallium, indium and tin. They have low reactivity and low toxicity but should be handled according to their safety data sheets and local regulations.
2) The actual power used is dependent on spot-size and voltage. However, maximum output power of the 160 kV high-voltage generators is 3000 W software limited to 1000 W.
3) Standard deviation.
| Available target alloys | |||
| Target alloy | Gallium [weight %] |
Indium [weight %] |
Tin [weight %] |
| ExAlloy-G14 | 95 | 5 | - |
| ExAlloy-I1 | 68 | 22 | 10 |
| ExAlloy-I24 | 47 | 37 | 16 |
| ExAlloy-I34 | 75 | 25 | - |
4) Operation of ExAlloy-G1, ExAlloy-I2 and ExAlloy-I3 requires that the MetalJet E1+ source is equipped with a heater system to manage the alloy temperature.
